Air Tools

ROOFING STAPLER, AIR - 1IN CROWN


	Image for reference only Actual item may look different Click on image for larger view

4 Hour: $20.00

Daily: $30.00

Weekly: $90.00

Quantity: for a period of
4 hour(s) day(s) week(s)

Additional Information

MODEL: T50S2
LENGTH: 14.25 (362mm)
HEIGHT: 10.75 (273mm)
WIDTH: 3.00 (76mm)
WEIGHT: 5.5lb.(2.5kg)
FASTENER SPECS:
STAPLE SERIES: S2-16 Ga.
CROWN WIDTH: 1 (25mm)
WIRE SIZE: .062 (1.58mm)
MAXIMUM LEG LENGTH: 2-1/8 (55mm)
TOOL AIR FITTING: This tool uses a free-flow connector plug, 1/4 N.P.T. The minimum inside diameter should be .200 (5mm). The fitting must be capable of discharging tool air pressure when disconnected from the air supply.
OPERATING PRESSURE: The operating pressure of the T50 tool is 70 to 100 p.s.i. (4.9 to 7.1 kg/cm2). Select the operating pressure within this range for best fastener performance. DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
AIR CONSUMPTION: Model T50 requires 3.0 cubic feet per minute (.08 cubic meters) of free air to operate at the rate of 100 fasteners per minute, at 80 p.s.i. (5.6kg/cm2). Take the actual rate at which the tool will be run to determine the amount of air required. For instance, if your fastener usage averages 50 fasteners per minute, you need 50% of the tool's c.f.m. of free air which is required for running at 100 fasteners per minute.

* Prices are subject to change.

* Please call us with any questions about our roofing stapler air 1in crown in Kokomo & Logansport IN, and surrounding areas including Central Indiana.

Air Tools

ROOFING STAPLER, AIR - 1IN CROWN

Additional Information

Equipment & Party Rentals

Equipment & Restroom Rentals